Preventive Controls — Content — measures to be taken — Feeds Regulations, 2024 (SOR/2024-132; registered 2024-06-17; in force 2024-06-17). Verbatim slice from the consolidated regulation, C1 substring-verified against pdf-parsed/ca-2026/cfia_feeds_regulations_2024.txt. Note: the Feeds Act framework governs livestock feed; pet food for dogs/cats is excluded from the Feeds Act per CFIA RG-1 — these labelling/standards/tolerance provisions are the Canadian feed-regulatory context relevant to pet-food labels.
Marginal note: Content — measures to be taken
(2) The preventive control plan must describe the measures that will be taken to ensure that
(a) the cleaning and sanitation of a facility and of any equipment are conducted in a manner that does not present a risk of contamination of a feed;
(b) a facility is protected against the entry of any animal that presents a risk of contamination of a feed and that the measures do not present a risk of contamination of that feed;
(c) no substance in a facility presents a risk of contamination of a feed and no substance is handled or used in a manner that presents such a risk;
(d) any sanitizer or non-feed chemical or biological agent in a facility
(i) is properly and clearly identified,
(ii) is suitable for its intended use, and
(iii) is handled and used in accordance with the manufacturer’s instructions;
(e) any agronomic input, pet food or veterinary drug in a facility is properly and clearly identified;
(f) any conveyance that is used to manufacture or convey a feed to or from a facility and that is unloaded or loaded at the facility
(i) is designed, constructed, used and maintained to prevent, eliminate or reduce to an acceptable level any risk of contamination of the feed,
(ii) is constructed of, and maintained using, materials that are suitable for their intended use and do not present a risk of contamination of the feed,
(iii) is equipped with instruments to control, indicate and record any parameters that are necessary to prevent, eliminate or reduce to an acceptable level any risk of contamination of the feed,
(iv) functions as intended,
(v) is accessible for cleaning, sanitizing, maintenance and inspection,
(vi) is of sound construction and in good repair,
(vii) if necessary, is calibrated in accordance with the manufacturer’s instructions,
(viii) does not contain or has not contained any animal, any
pest control product
as defined in subsection 2(1) of the
Pest Control Products Act
or any other material or substance that presents a risk of contamination of the feed unless the conveyance is adequately sanitized, and
(ix) is clean and in a sanitary condition to prevent, eliminate or reduce to an acceptable level any risk of contamination of the feed;
(g) any equipment that is used in the manufacturing, storing, packaging or labelling of a feed
(i) meets the requirements set out in subparagraphs (f)(i) to (vii), and
(ii) is appropriate for the feed and for the activity being conducted;
(h) any equipment or conveyance in a facility that is used to handle contaminated materials, waste or any other thing that is not intended for a feed, unless that equipment or conveyance does not come into contact with those materials, that waste or those things,
(i) is used only for that purpose and identified as being reserved for that purpose, or
(ii) meets the applicable requirements set out in paragraph (g);
(i) any risk is prevented, eliminated or reduced to an acceptable level for
(i) any land that forms part of a facility and that presents a risk of contamination of a feed, and
(ii) any facility located near any place or thing that presents a risk of contamination of a feed;
(j) the interior of a facility is
(i) designed to minimize the accumulation of materials that present a risk of contamination of a feed and to permit effective maintenance, cleaning and, if applicable, sanitizing,
(ii) designed, constructed and maintained in such a manner that it does not present a risk of contamination of a feed, including
(A) the size and layout are adequate to accommodate the activity being conducted and the equipment used in the activity,
(B) the entry of insects, rodents and other vermin is minimized, and
(C) any floors, walls, ceilings, windows and doors are smooth, non-absorbent and impervious to moisture, except if those floors, walls, ceilings, windows or doors do not present a risk of contamination of a feed,
(iii) constructed of, and maintained using, materials that are suitable for their intended use and appropriate for the feed and for the activity being conducted, and
(iv) of sound construction and in good repair;
(k) a facility or conveyance where a feed is manufactured, stored, packaged or labelled is designed, constructed and maintained in such a manner that the movement of persons and things within, into and out of it is controlled;
(l) the movement of persons and things referred to in paragraph (k) does not present a risk of contamination of a feed;
(m) physical or other effective means are used to separate incompatible activities in order to prevent contamination of a feed;
(n) physical or other effective means are used to separate a feed from
(i) anything that presents a risk of contamination of the feed,
(ii) any feed that does not meet the requirements of the Act or these Regulations, and
(iii) anything that is manufactured, stored, packaged or labelled in a facility and not intended or sold for use as a feed;
(o) any feed that does not meet the requirements of the Act or these Regulations is identified as such and placed in a designated area when it arrives at a facility;
(p) the feed referred to in paragraph (o) does not contaminate any other feed that is in the facility;
(q) a facility has means for the removal and disposal of contaminated materials and waste and, if necessary to prevent contamination of a feed, is equipped with a drainage, sewage and plumbing system that functions as intended;
(r) contaminated materials and waste are removed and disposed of at a frequency that is sufficient to prevent contamination of a feed and in a manner that does not present a risk of contamination of the feed;
(s) any water that might come into contact with a feed must not present a risk of contamination of that feed;
(t) any steam or ice that might come into contact with a feed must not present a risk of contamination of the feed;
(u) any system that supplies water is not cross-connected with any other system, unless measures are taken to prevent, eliminate or reduce to an acceptable level any risk of contamination of a feed as a result of the cross-connection;
(v) any treatment of water, steam or ice is conducted in a manner that does not present a risk of contamination of a feed;
(w) any unloading and loading of a feed from or onto a conveyance at a facility is conducted in a manner that does not present a risk of contamination of the feed;
(x) any storing of a feed is conducted in a manner that does not present a risk of contamination of the feed;
(y) any storing of conveyances, equipment, sanitizers, agronomic inputs, veterinary drugs, chemical agents, packaging materials, labels or any other thing that is used in the manufacturing, storing, packaging or labelling of a feed is conducted in a manner that does not present a risk of contamination of the feed;
(z) any person who is involved in the manufacturing, storing, packaging or labelling of a feed has the competencies and qualifications that are necessary to carry out their duties;
(z.1) any person who enters or is in an area where a feed is manufactured, stored, packaged or labelled wears clothing, footwear and protective coverings that will prevent, eliminate or reduce to an acceptable level any risk of contamination of the feed; and
(z.2) a facility and any equipment are clean and in a sanitary condition to prevent, eliminate or reduce to an acceptable level any risk of contamination of the feed.
Marginal note: Content — other requirements
(3) The preventive control plan must include a description of the measures for ensuring that the applicable requirements set out in sections 34 to 54, 61 to 64, 69 and 71 are met.
Marginal note: Retention period — documents
60
Any person that is required to prepare, keep and maintain a written preventive control plan must keep
(a) a copy of each version of the preventive control plan for two years after the day on which that version ceases to be implemented; and
(b) supporting documents that show evidence of the information set out in section 59 and documents that substantiate that the preventive control plan has been implemented with respect to that section, for two years after the day on which they are prepared.